Coin-op Table Parts
Click on thumbnail image for a larger image.
2050 Small Wood Wedges, Bag of 50 $4.25
2052 Small Wood Wedges, Bag of 100 $7.50
Used for shimming slate. Made from maple hardwood.
L. 2" x W. 1/2" x H. 5/16"
2054 Flat Shims, Bundle of 50 $4.15
Wood floor shims. 3 1/4" x 4" and only 1/32" thick.
3" Rubber Flat Shims
Non-slip leveling rubber shims that are easily cut for custom installations. Keeps your billiard table level and secure even on hardwood floors.
2080 1/32" thick, bag of 50 $11.25 2082 1/16" thick, bag of 50 $13.25
2084 1/8" thck, bag of 50 $20.25 2086 1/4" thick, bag of 25 $16.25
2053 Plastic Featherstrips $5.95
48" x 1/4" x1/4" black plastic strip. Set of 6
2056 Wood Featherstrips $5.95
Feather strips are used on non-tavern tables to help attach billiard cloth on the top of rails. 54" x 1/4" x 5/16" very clean basswood strips. Set of 6
2055 Rubber Featherstrip $6.75
Available in 27 ft. package. Enough to do a 9 ft. or smaller table. Also available by the foot.
6108 Tweeten Fibre Block $7.95
Used to pound featherstrips into rails without damaging or cracking the wood.
1050 1 lb. 100% Pure Beeswax $7.45
Used to fill the seams on a three piece slate table. Available in
1lb. bar or 1oz. bar.
1051 1 oz. 100% Pure Beeswax $1.20
5001 Duo-Fast Stapler Model EWC-5018A $229.00
Drives fine wire, 1/2" crown staples. Side loading magazine holds 84 staples. Weighs only 4lb., 3oz.
Staples, 5000/box
Galvanized wide crown (1/2") chisel point staples. Use with Duo-Fast 5000 Series Staplers; CS-5000, DWS-5020, Sure Shot 5020 and EWC-5018A
5002 1/4" Duo-Fast Staples $6.70 5003 5/16' Duo-Fast Staples $6.95
5004 3/8" Duo-Fast Staples $8.20 5005 5/16" Value Staple $6.65
5006 1/2" Value Staple $$4.95
5008 Crain Staple Puller $9.95
Make short work of removing those old staples with the economically priced Crain Staple Remover. The comfortable handle and curved design add to the ease of use.
5009 Berry Staple Puller $14.35
Used for pulling staples out of bed cloth, rail cloth and pockets.
Cushion Rubber
Various length and grade cushion rubber in U23, K55, K66 and Century profiles
Click here for profile dimensions.
3010 3.2mm Rectangular Cushion Facings $2.75
3012 5.5mm Rectangular Cushion Facings $3.25
Cushion facings are attached to the ends of cushion rubber to firm up the ends of the rubber. They come in sets of 12 ( 8 corner facings and 4 side pocket facings) and are availble in 3.3mm and 5.5mm thickness.
3011 3.2mm Shaped Cushion Facings $2.25
3013 5.5mm Shaped Cushion Facings $2.75
Cushion facings are attached to the ends of cushion rubber to firm up the ends of the rubber. They come in sets of 12 ( 8 corner facings and 4 side pocket facings) and are availble in 3.3mm and 5.5mm thickness.
2079 Snooker Bends $24.95
Set of 12 to match up with K-55 profile rubber.
Leather Pockets, Set of 6 $49.95 - $89.95 Call
100% leather drop pockets come in a Shield or Fringe style and are available in black, brown, honey and cordovan. Specify style and color when ordering. #6 pocket irons only.
6116 Adjustable Fork Bit $7.75
This adjustable fork bit is made especially for replacing or removing antique round head rail bolts.
3002 3" Plastic Pocket Liners, Set of 6
3004 4" Plastic Pocket Liners, Set of 6
Available in 3" or 4" depth. All six are the same size, so side pockets may need to be trimmed.
3008 Gully Boots, Set of 6
Commonly used on coin-op tables. Catches balls as they drop in pockets.
3014 Leg Leveler, Set of 4
3016 Leg leveler, One
3018 Leg Leveler, Female Plate, Set Of 4
3020 Leg Leveler, Female Plate, One
P-G20191 6" Silver Leg leveler Set/4
Sold in set of four levelers with the female plate.
2099 3' Rubber Pocket Liner
Rubber pocket liner provides more flexibility than the hard plastic liners. Also has a recessed
spot for pocket nails so ball will not scratch if it hits nail head.
1055 ESD Coin Insert
1052 ESD V4 Adjustable Coin Slot
All Slides Have Case Hardened Parts To Resist Damage From Slamming. Optional 2nd Gate Eliminates stringing, taping, wrapping and all other pullback methods of coin retrieval.
$1.00 Maximum, Comes Set at $0.50
1053 ESD V8 Adjustable Coin Slot
All Slides Have Case Hardened Parts To Resist Damage From Slamming. Optional 2nd Gate Eliminates stringing, taping, wrapping and all other pullback methods of coin retrieval.
$2.00 Maximum, Comes Set at $1.00
7021 Dynamo Push Chute Trap
7022 Valley Push Chute Trap
Replacement trap for Valley or Dynamo tables
7020 Shoulder Bolt
For use with the push chute trap. Hardened and ground shoulder bolt to hold ball dump tray in place.
1054 Coin Slot Spring
Replacement spring for ESD vertical coin mechanisms. Sold in sets of two.
1057 ESD Decals
1056 ESD Blank Plug
7023 Push Chute Trap Spring
Penguin Coin-Op Rail Sets
Specialty Penguin Brand replacement pool table rails for coin-operated pool tables. Made from #1 Clear poplar Premium pink K-55 rubber
"Sawtooth" style T-Nuts will not let go!Smooth cushion facings are glued and stapled.
Made with pride in the USA.
7024 Push Chute End
7010 Push Chute Door Trim
7014 Ball View Door Trim
7016 Ball Return Door Trim
7018 Triangle Trim
Pre-drilled aluminum molding strips that fit snugly into any standard coin-operated pool table.
7002 Rail Trim Set for 7' & 8' Valley or Dynamo Tables
7000 Replacement Rail Bolts
Penguin brand rail bolts have a high quality bright zinc plating and an exclusive square drive, hex, and phillips head combination. About half the price of Valley/Dynamo rail bolts.
7003 T-Nuts
A 1/4" sawtooth style t-nut is the industry standard and fits most pool table brands.
7012 Push Chute Door (Coin Door)
7032 7/8" Tubular Lock with 2 Keys and 1 1/4" Double Ended Cam
This lock set is recommended for the coin slot door. The double end cam can be attached for either left or right placed locks.
7030 1 1/8" Lock with 1 Key and 1 1/2" Cam, 12-3 Pull
This lock is recommended for use on the ball view door. The key can be removed or inserted from either the twelve o'clock position or the three o'clock position..
9052 Nortech Easylift Pool Table Jack
To use: Place the top "T" under one end or side of the table then push down on the grip and the side or end is easily raised for adjusting the pool table's leg leveler.
5022 Large Plastic Pocket Plug
5023 Small Plastic Pocket Plug
Penguin brand pocket buttons attach pocket liners to corner castings. Nylon ribs grip hole. Two sizes tofit 1/4" and 3/16" holes respectively.
5021 Pocket Nails
These are exact replacements for popular pocket nails. Chrome twist nail with smooth head hold pocket liners in place.
9052 Nortech Easylift Pool Table Jack
To use: Place the top "T" under one end or side of the table then push down on the grip and the side or end is easily raised for adjusting the pool table's leg leveler.
9051 Nortech Easylift Slate Lifter
The “One-Person Slate Handling Package” can turn a two man job into a one person job, thus saving labor costs.
