Coin-Op Table Supplies
Click on thumbnail for larger image
3002 3" Plastic Pocket Liners, Set of 6
3004 4" Plastic Pocket Liners, Set of 6

Available in 3" or 4" depth. All six are the same size, so side pockets may need to be trimmed.
2099 3" Rubber Pocket Liner

Rubber pocket liner provides more flexibility than the hard plastic liners. Also has a recessed spot for pocket nails so ball will not scratch if it hits nail head.
3008 Gully Boots, Set of 6

Commonly used on coin-op tables. Catches balls as they drop in pockets.
3014 Leg Leveler, Set of 4
3016 Leg leveler, One
3018 Leg Leveler, Female Plate, Set Of 4
3020 Leg Leveler, Female Plate, One
P-G20191 6" Polished Aluminum Leg leveler Set/4

Sold in set of four levelers with the female plate.
1052 ESD V4 Adjustable Coin Slot

All Slides Have Case Hardened Parts To Resist Damage From Slamming. Optional 2nd Gate Eliminates stringing, taping, wrapping and all other pullback methods of coin retrieval.
$1.00 Maximum, Comes Set at $0.50
1053 ESD V8 Adjustable Coin Slot

All Slides Have Case Hardened Parts To Resist Damage From Slamming. Optional 2nd Gate Eliminates stringing, taping, wrapping and all other pullback methods of coin retrieval.
$2.00 Maximum, Comes Set at $1.00
1055 ESD Coin Insert
1056 ESD Blank Plug

1057 ESD Decals

1054 Coin Slot Spring

Replacement spring for ESD vertical coin mechanisms. 
7021 Dynamo Push Chute Trap
7022 Valley Push Chute Trap

Replacement trap for Valley or Dynamo tables
7024 Push Chute End
7020 Shoulder Bolt

For use with the push chute trap. Hardened and ground shoulder bolt to hold ball dump tray in place
7023 Push Chute Trap Spring
Penguin Coin-Op Rail Sets

Specialty Penguin Brand replacement pool table rails for coin-operated pool tables. Made from #1 Clear poplar Premium pink K-55 rubber "Sawtooth" style T-Nuts will not let go! Smooth cushion facings are glued and stapled.
Made with pride in the USA. 
7010 Push Chute Door Trim
7014 Ball View Door Trim
7016 Ball Return Door Trim
7018 Triangle Trim

Pre-drilled aluminum molding strips that fit snugly into any standard coin-operated pool table
7002 Rail Trim Set for 7' & 8' Valley or Dynamo Tables 
7012 Coin Door
7003 T-Nuts

A 1/4" sawtooth style t-nut is the industry standard and fits most pool table brands
7000 Replacement Rail Bolts

Penguin brand rail bolts have a high quality bright zinc plating and an exclusive square drive, hex, and phillips head combination. About half the price of Valley/Dynamo rail bolts
5021 Pocket Nails

These are exact replacements for popular pocket nails. Chrome twist nail with smooth head hold pocket liners in place.
5022 Large Plastic Pocket Plug
5023 Small Plastic Pocket Plug

Penguin brand pocket buttons attach pocket liners to corner castings. Nylon ribs grip hole. Two sizes tofit 1/4" and 3/16" holes respectively.
7030 1 1/8" Lock with 1 Key and 1 1/2" Cam, 12-3 Pull

This lock is recommended for use on the ball view door. The key can be removed or inserted from either the twelve o'clock position or the three o'clock position..
7032 7/8" Tubular Lock with 2 Keys and 1 1/4" Double Ended Cam


This lock set is recommended for the coin slot door. The double end cam can be attached for either left or right placed locks.
9052 Nortech Easylift Pool Table Jack

To use: Place the top "T" under one end or side of the table then push down on the grip and the side or end is easily raised for adjusting the pool table's leg leveler
9051 Nortech Easylift Slate Lifter

The “One-Person Slate Handling Package” can turn a two man job into a one person job, thus saving labor costs.

9050  Nortech Easylift Pool Table Mover

This Lift was originally designed for coin operated tables. If you order it for a home table, it will still work. The unit lifts to a maximum height of just over 17 1/2" alone but adding a platform such as 2x4s or 4x4s onto the top will give you the extra lift needed to contact the bottom of a home table so you will still be able to move it just as easily. We do not recommend the use of this item on a slate bottom table.